Training & Manpower Development
C-MIST is an approved training centre for a number of UK and International awarding bodies:
Certificate of
Registration
Certified
F.A Training
& Qualification
Approval
Certificate
Approved
Centre
Certified Centre
Approved Centre
Our in-house specialists provide the following Training and Manpower Development Options:
Manpower Development
- Asbestos Control
- Asbestos Remediation
- Auditing
- CDM Co-ordination
- Documentation
- Emergency Planning
- Emergency Response
- Environmental Assessment
- Expert Witness
- Inspection
- Investigation
- Laboratory Testing
- Maintenance of Fire Protection Systems
- Management Support
- Principal Contractor Support
- Process Safety Management
- Project Management
- Qualitative Risk Assessment
- Research
- Risk Assessment
- Sampling & Analysis
- Waste Management
Training Options
Construction
-
Cut and Grind
This course has been developed so as to meet the full requirements of the PUWER Regulations and is designed for candidates who have had no training on cutting and grinding tools and those requiring refresher training.
-
Use of C.A.T & Genny
This course has been developed to assist any operative working in or around ground working activities, such as machine operators, banksman, site engineers, site foreman and site managers.
-
Abrasive Wheels & Face Fit Test
Employers are required to ensure that anyone changing and mounting a bonded abrasive wheel or disc has received the appropriate instruction and training on the aspects of safety in relation to abrasive wheels.
-
Asbestos Awareness
This course has been developed to give instruction on the hazards and dangers involved with asbestos and are intended for all persons working in areas where asbestos materials may be located.
-
Managing Asbestos in Buildings
The amendments to the control of asbestos at work regulation require asbestos contained within buildings to be identified and managed.
-
Hand Arm Vibration
This course has been developed so as to advise both management and operatives in the hazards and dangers from hand arm vibration and to advise them on the correct systems and procedures to be implemented within the work place.
-
Slinger / Signaller
This course has been developed and designed for candidates who have had no training in the systems and procedures involved in slinging loads or signalling.
-
CDM Training
This course has been developed for anyone who deals with the administration of contracts, from clients, designers, safety advisors and principal contractors to general contractors and estimators.
-
Tackle Inspection Course
Anyone with specific responsibilities for inspecting or using lifting gear.
-
Ladder Safety
Anyone having to supervise or use any type of ladder when in a working environment. The course will be presented using overhead projector presentation and appropriate videos to emphasise points on safety.
-
Safety Awareness Course
To help individuals become aware of the basic safety information they would know whilst working on a building or construction environment.
-
Banksman Techniques
Useful for anyone with responsibility for safely directing the movement of plant, equipment or materials within the work area. The course will be presented using overhead projector presentation and appropriate videos to emphasise points on safety.
-
Office Safety
Useful for anyone carrying out work in an office environment and requiring basic information on the hazards and legislation's covering office work.
-
Confined Space Entry Course
The course has been developed for Site Management, agents and operatives who are responsible for the entry in to confined spaces.
-
Demolition Operative Safety Awareness
This course has been developed so as to meet the full requirements of the demolition safety requirements and is designed for candidates who have had no training on demolition and those requiring refresher training.
-
Fire Safety in Construction Work for Operatives
The course has been developed to provide Contractors with the necessary knowledge and skills to satisfy their fire safety responsibilities within construction projects.
-
Fire Safety in Construction Work for Designers
The course has been developed to provide Designers with the necessary knowledge and skills to satisfy their fire safety responsibilities within construction projects.
-
Fire Safety Induction Course
The aim of the course is to provide all employees with the necessary fire safety training to satisfy the requirements of the Fire Precautions Act 1971, and the Management of Health and Safety at Work Regulations 1992. It achieves this by training all employees on the actions to be taken in the event of a fire.
-
Fire Wardens Training Course
This training is designed for appointed fire wardens, to enable them to carry out their duties effectively. This training fulfils the employer’s duty to provide training as required by the Fire Precautions (Workplace) Regulations 1997. The training will provide fire wardens with a detailed knowledge and understanding of fire safety, which will allow them to undertake their duties effectively.
-
Fire Safety in Construction Work for CDM - Coordinators
The course has been developed for Site Management, agents and operatives who are responsible for the entry in to confined spaces.
-
Fire Risk Assessment
The course has been developed to equip Senior Managers and other personnel with fire safety responsibilities with necessary knowledge and skills to satisfy their fire safety responsibilities.
-
Site Management Safety Training Scheme (2-Day Refresher)
A refresher course for Directors, Managers and supervisors who have attended the five-day Site Management Safety Training Scheme course since 01 January 2001.
-
Site Management Safety Training Scheme (5 Day)
The Site Management Safety Training Scheme has been approved by the Department for Education and Employment under Section 96 of The Skills and Learning Act 2000 and is recognised by such organisations as the Health & Safety Executive, the CIOB and the ICE as a relevant and valuable step towards a student becoming a competent manager of a building and construction site.
It helps site managers (and anyone wanting to become a site manager) to develop a better understanding of the legal, moral and social responsibilities of their role, and to manage health and safety on site in accordance with current legal provisions.
-
Qualitative Face Fit Assessors
Managers and Operatives wishing to carry out qualitative face fit testing to facepiece wearers working on-site and in-house.
-
Managing Safely
Managing Safely is for those required to manage safely and effectively in compliance with both their organisation's policy and best practice in Health and Safety. Managing Safely comprises seven core modules requiring a total direct input period of at least 24 hours plus assessment time. The delivery can be spread over a convenient time span. One organisation-specific module may be added if required.
It aims to equip managers, supervisors and others with the knowledge to implement appropriate management control of health & safety.
-
First Aid at Work
The Health and Safety (First-Aid) Regulations 1981 require that in order to provide first aid to their employees who are injured or become ill at work, employers must have adequate and appropriate equipment, facilities and personnel.
-
First Aid at Work (Refresher)
The Health and Safety (First-Aid) Regulations 1981 require that in order to provide first aid to their employees who are injured or become ill at work, employers must have adequate and appropriate equipment, facilities and personnel.
-
First Aid at Work (Appointed Person)
The Health and Safety (First-Aid) Regulations 1981 require that in order to provide first aid to their employees who are injured or become ill at work, employers must have adequate and appropriate equipment, facilities and personnel.
An appointed person is someone chosen to:
- take charge when someone is injured or falls ill, including calling an ambulance if required;
- look after the first aid equipment, eg restocking the first aid box.
Appointed persons should not attempt to give first aid for which they have not been trained.
-
Working at Heights
The course is for managers, supervisors and other responsible for working at height operations within the work environments.
- [ top / close ]
Environmental
-
Environmental Health in Oil & Allied Industries
1 or 2 weeks
-
Environmental Health in Chemical & Petrochemical Industries
1 or 2 weeks
-
Packaging Waste Regulations
2 days
-
Environmental Management Systems
1 to 3 weeks
-
Environmental Safety
1 to 3 weeks
- [ top / close ]
Fire Safety
-
Industrial Fire Fighting & Fire Safety Engineering
39 weeks (Modular)
-
Industrial Fire Fighting
2 or 8 weeks
-
Industrial Fire Safety
1 week
-
Fire Safety Awareness
1 week
-
Fire Safety for Production/Manufacturing Personnel
1 or 2 weeks
-
Fire Marshal Training
½ or 1 day
-
Basic Fire Safety
½ or 1 day
-
Ship Fire Fighting
1 week
-
Off-Shore Fire Fighting
1 week
-
Fire Investigation
1 week
-
Breathing Apparatus - Wearer’s Course
2 weeks
-
Breathing Apparatus - Operator’s Course
1 week
-
Breathing Apparatus - Awareness
2 days
-
Breathing Apparatus - Procedures
1 day
-
Breathing Apparatus - Maintenance
1 day
-
Rescue & Specialised Firefighting
1 week
-
Fire Prevention &Protection Systems & Equipment
1 to 3 weeks
-
Marine – Basic Firefighting Course
2 days
-
Marine – Intensive Firefighting Course
4 days
-
Marine – Command and Control Course
3 days
-
Marine – Firefighting Refresher Course
1-4 days
-
Marine – Vapour Firefighting Course
1-2 days
-
Marine – Vapour Firefighting Course
½ day
-
Residential Carers Fire Safety Course
½ day
-
Integrated Ships Company Firefighting Course
4 days
- [ top / close ]
Hazardous Cargo Handling
-
Hazardous Cargo Handling (Marine Transportation)
1 or 2 weeks
-
Hazardous Cargo Handling (Road Transportation)
1 or 2 weeks
-
Hazardous Cargo Handling (Rail Transportation)
1 or 2 weeks
-
Handling & Transportation of Hazardous Materials
1 to 3 weeks
- [ top / close ]
Maritime & Off-Shore
-
Chemical Carrier Safety (Marine)
1 week
-
Liquefied Gas Carrier Safety (Marine)
1 week
-
Petroleum Tanker Safety (Marine)
1 week
-
Marine Terminal/Jetty Operation Safety
1 week
-
Management of Shipping and Cargo Handling
3 weeks
- [ top / close ]
Occupational Health and Industrial Hygiene
-
Display Screen Equipment Regulations
½ day
-
Managers’ Guide to Occupational Health & Industrial Hygiene
1 day
-
HSE First Aid
3 day
-
HSE First Aid Refresher
2 day
-
Emergency First Aid
1 day
-
HSE Annual update
4 hours
-
Training of First Aid Trainers
1 or 2 weeks
-
Occupational Hygiene
1 to 3 weeks
-
Human Factors in Safety
1 or 2 weeks
- [ top / close ]
Oil, Gas & Petrochemical
-
Industrial Safety Technology & Risk Management
39 weeks (Modular)
-
Hazard & Operability Studies (HAZOP)
1 to 3 weeks
-
Process Plant Safety
2 weeks
-
Process Plant Operation
39 weeks (Modular)
-
Management of Safety
2 weeks
-
Management of Risk
3 days
-
Accident Reporting, Investigation & Analysis
1 week
-
Hazard Identification - Five Phase Approach
3 days
-
NVQ/SVQ Internal Assessor Training
3 days net
-
Training Needs Analysis
1 or 3 days
-
Training the Trainer
1 week
-
Industrial Crisis Management
3 - 5 days
-
Safety of Electrical Equipment in Hazardous Areas
1 or 2 weeks
-
Safety of Mechanical Equipment in Hazardous Areas
1 or 2 weeks
-
Industrial Safety & Loss Prevention
39 weeks (Modular)
-
Development of Management Systems
1 to 3 weeks
-
Applied Science & Properties of Materials
1 to 3 weeks
-
Safety Instrumentation & Equipment
1 to 3 weeks
-
Combustion Technology
1 to 3 weeks
-
Industrial Safety Management Systems
1 to 3 weeks
-
Emergency Planning & Crisis Management
1 to 3 weeks
-
The Management, Execution and Reporting of Audits
1 to 3 weeks
-
Plant Safety Auditing
1 to 3 weeks
-
Safe Systems of Work
1 to 3 weeks
-
Accident Reporting, Investigation & Analysis
1 to 3 weeks
-
Assessment of Major Industrial Risks
1 to 3 weeks
-
Process Safety Operations
1 to 3 weeks
-
Advanced Process Safety Operation
1 to 3 weeks
-
Industrial Safety & Loss Control for Managers
10 to 39 weeks (Modular)
-
Petrochemical Plant Operations
(Ethylene, Ammonia, Urea or Methanol options)20 to 39 weeks (Modular)
-
Liquefied Gas Plant Operations
20 to 39 weeks (Modular)
-
Oil & Gas Production Operations
20 to 39 weeks (Modular)
-
Oil refinery Operations
20 to 39 weeks (Modular)
- [ top / close ]